Smart Lift SL 580 MAXI, User Manual

Page: 18 / 30

US SL 580 MAXI 03/2016
18
Stop-Down Troubleshooting
On any fault on Smartlift, first look into the options below:
• Has anything visible been broken, or is anything unusual, about the machine ? Is there any
murmuring or noise?
• Have the batteries been charged, and the main switch switche d on? (the On/Off button on the
drive handle shall have been switched on (lighting) to read battery voltage on battery indicator)
•
Has the emergency stop button switched the machine off? (located on grey control box)
• Has the safety switch been switched off on account of overloading (placed under pressure
switches)?
•
Is the hose set intact, and has it been connected correctly?
Troubleshooting and remedying of faults will be divided into
3 overall categories:
1. Vacuum
(machine capacity for sucking work)
2. Movements controlled via control panel
up and down function of lift arm, telescoping
of lift arm, tilting of yoke, side displacement of machine.
3. Drive controlled by regulating lever
–
Forward and back function of machine
Vacuum
Moveing of
actuators
Drive
© 2006 Copyright. www.smartlift.dk