Page 39
Storage > Media
Figure 37 - http interface / storage media page
Any storage device that has been mounted and recognised by the operating system will be displayed here.
Storage > Sessions
Figure 38 - http interface / storage sessions page
This page displays the current storage sessions saved on the storage media, each has a session ID number.
A new session is a started each time Storage is switched on, either by setting the Storage mode via the http
interface or using the “Start” control from SmartSoft or if the storage target was not set to “NONE” and the
interrogator has been switched on. The session will end when storage is stopped via http or SmartSoft or
when the storage device is full. There could be one or many files in the session depending on the data
length specified and the duration of the storage session.
Storage sessions can be deleted from the media by selecting session IDs for deletion and pressing Delete.
Transferring data from On-board Storage to PC
There are multiple ways to get the data off the interrogator depending on the type of storage media used.
For either method first ensure that no storage session is still in progress to avoid the risk of corrupting
data.
If the media is external simply remove the USB device from the interrogator and plug it into the USB port
on the host PC.
