Basic Operation
9
5.4
Menu Navigation
The menu items with the settings for TV and
radio can be respectively accessed in the two
operation modes TV and Radio.
For menu navigation, you can use both the
keys at the receiver as well as the remote
control:
Press
PR+
to select the menu item above.
Press
PR-
to select the menu item below.
Press
to change resp. increase the
selected value or to get on the right side of
the screen.
Press
to change resp. decrease the
selected value or to get on the left side of
the screen.
Instead of changing a value by
using the keys
and
,
with many menu items you can also
press the
OK
key, select a new val-
ue from the list, and confirm such
value by again pressing the
OK
key.
Active menu items are color-marked.
Although most settings for TV operation are
made, you can also make some further set-
tings via the menu.
5.5
Parental Lock
In the submenu
Parental Lock
you can lock
access to certain menus by using a PIN (e.g.
for protection of your settings) or block selec-
tion of certain channels by using a PIN.
Access the submenu
Parental Lock
as fol-
lows:
1. Press the
MENU
key.
2. Select the menu
System setup
.
3. Select
Parental lock
and confirm by
pressing
OK
.
After entry of password, you may
−
set if access to the submenus is pro-
tected by password,
by selecting the
Menu lock
and select-
ing
Off
or
On
by using the keys
or
;
−
set if certain channels are to be locked
by a PIN,
by selecting
Channel lock
and select-
ing
Off
or
On
by using the keys
or
; or
−
change the password:
Select the field
New Password
.
Enter a new password.
Go to the field
Confirm Password
.
Again enter the new password.
Predefined, both the menu and the
program lock are
on
. The default
password is
0000
.
4. Press
OK
to save your changes and to
leave the submenu.
5. Leave the menu by pressing
EXIT
until the
screen shows the TV picture.
Instead of completely leaving the
menu, you can also further stay in
the menu - or in the submenu - to
perform further settings.
5.6
Set Time
Reasonable operation of the receiver require
setting of system time. By default, the receiver
is set to
GMT
2F
3
usage
, i.e. date and time are
taken from the received signal. Time zone is
set to GMT + 1 hour (+ 1:00) by default. Re-
quired changes can be made in the submenu
Local Time Setting
:
1. Select the menu
System setup
(see
above).
2. Select the submenu
Local Time Setting
and confirm by pressing
OK
.
3. Select the item
GMT usage
and switch on
or off
GMT usage
by using the keys
or
.
On
= automatic time setting via cable sig-
nal is activated.
3
GMT = Greenwich Mean Time
