smart-e 4K-8x8-L, User Manual

Page: 59 / 61

4K-8x8-L USER MANUAL V1.0
© 2018 Smart-e (UK) Ltd www.smart-e.co.uk PAGE | 59
14 HDBASET CABLING
It is advised to use T568B termination at the 4K-8x8-L and receiver termination points.
NOTE: As the 4K-8x8-L utilises power over cable (POC), if the CATx cable is incorrectly terminated there
is a danger of damaging both the 4K-8x8-L output and receiver. If you suspect an incorrectly terminated
cable may have been applied, please contact Smart-e support immediately.
HDBaseT signals can be susceptible to noise, causing image loss or snowy effects on output screens. The
best way to mitigate against these problems is by using a high quality CATx cable. Smart-e specify cable as
below.
RECOMMENDED CATx CABLE
Connectix CAT6a U/FTP Solid core cable