4K-866 USER MANUAL V1.0
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 15
7
BASIC SETUP
1.
Test the CATx cables to be used for HDBaseT link and if required Ethernet. This can be achieved with
a cable tester, optionally you could purchase a 4K-9000 HDBaseT tester from Smart-e which is
purpose built to test for HDBaseT installations. Ensure cables are terminated correctly and preferably
to the specification as outlined in section 9 of this manual.
2.
Attach all general input and output cables to your 866 units:
➢
HDMI cables
➢
Ethernet cables
➢
IR TX and IR RX devices
➢
RS232 connections
3.
Attach the screw lock output of the power supply to the DC input jack of either the TX or RX 866 unit
4.
Connect the HDBaseT CATx cable between the 866 units
5.
Plug the power supply in to a mains outlet
6.
There is no power specific indication on the 866 units, to check functionality a number of status LEDs
are supplied on each unit, to show their meaning and how they can aid in fault locating refer to section
8 of this manual.
