4K-866 USER MANUAL V1.0
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 13
6.3
RS232 PLUGS
Each 866 device is supplied with a 3-pin phoenix screw lock plug to insert in to the receptacle on the 866 as
indicated below. The pin out is indicated on the silk screen of the 866 device, you should strip back
approximately 10mm of cable and then secure by screwing in to the appropriate space of the screw lock plug.
Make sure cable is not attached to your RS232 controller whilst stripping or attaching to the terminal block.
