4K-866 USER MANUAL V1.0
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 12
6.2
INFRA-RED TRANSMITTERS (IR TX)
The infra-red transmitter for the 866 range consists of an infra-red emitting diode at one end and a 3.5mm
stereo jack at the other. The 3.5mm stereo jacks takes infra-red signals from the 866 device and send them
to the IR emitting diode, the IR emitting diode should then be attached in close proximity of the IR receiver of
the device you wish to control. A small adhesive pad is included to attach to your device, please check with the
manufacturer of the device you wish to control where the IR receiver is located to ensure reliable functionality.
The 3.5mm jack of the IR TX should be inserted in to the 3.5mm socket as shown below.
NOTE: Only IR TX units supplied with the 866 unit are compatible, use of other IR TX devices may result
in no infra-red functionality.
