SMART Board SPNL-4055, User Manual

Page: 3 / 46

i smarttech.com/kb/170800
Important information
WARNING
l
Failure to follow the installation instructions shipped with the interactive flat panel could
result in injury and product damage which may not be covered by the warranty.
l
Do not open or disassemble the interactive flat panel. You risk electrical shock from the high
voltage inside the casing. Opening the casing also voids the warranty.
l
Do not stand (or allow children to stand) on a chair to touch the surface of the interactive flat
panel. Rather, mount the product at the appropriate height.
l
To reduce the risk of fire or electric shock, do not expose the interactive flat panel to rain or
moisture.
l
If the interactive flat panel requires replacement parts, make sure the service technician
uses replacement parts specified by SMART Technologies or parts with the same
characteristics as the original.
l
Ensure that any cables that cross the floor to the interactive flat panel are properly bundled
and marked to avoid a trip hazard.
l
Use only extension cords and outlets that can fully accommodate the interactive flat panel’s
polarized plug.
l
Use the power cable provided with the interactive flat panel. If a power cable is not
supplied with the interactive flat panel, please contact your supplier. Use only power cables
that match the AC voltage of the power outlet and that comply with your country’s safety
standards.
l
If the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass
fragments with care when disposing of them.
l
Use only VESA®-approved mounting hardware.
l
Do not insert objects inside the cabinet ventilation holes, because they could touch
dangerous voltage points and cause electric shock, fire or product damage which may not
be covered by the warranty.
l
Do not place any heavy objects on the power cable. Damage to the cable could cause
shock, fire or product damage which may not be covered by the warranty.