SMART Board 480i6, Configuration And User'S Manual

Page: 89 / 106

A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
81 smarttech.com/kb/170584
Field Possible Values Description
target contactinfo
l
= User String
current contactinfo
l
User String
current modelnum
l
User String Must match the OSD screen
current videomute
l
on
l
off
The ranges must match the OSD ranges
target videomute
l
= on
l
= off
The ranges must match the OSD ranges
current
vgaoutnetenable
l
on
l
off
Current status of the VGA Out Enable and
Network Enable
target vgaoutnetenable
l
= on
l
= off
Value to set the VGA Out and Network Enable
to.
current
emergencyalertmsg
l
User String Emergency Alert Message
target
emergencyalertmsg
l
= User String Emergency Alert Message
current emergencyalert
l
on
l
off
To display the alert message, set this value to
on. To clear it, set it to off.
target
emergencyalertmsg
l
= on
l
= off
If the message is being displayed, return on.
current signaldetected
l
true
l
false
If a signal is currently detected, then this
command returns true. Otherwise false is
returned.
Command List
l
.... A listing of commands follows the response.
This list does NOT include service information
commands.