SMART Board 480i6, Configuration And User'S Manual

Page: 64 / 106

A P P E N D I X A
Remotely managing your system through a network interface
56 smarttech.com/kb/170584
Submenu setting Description
CC Displays or allows you to set the e-mail address of the e-mail alert
“copy to” recipient.
From Displays or allows you to set the e-mail address of the user who
sends the e-mail alert.
Subject Displays or allows you to set the e-mail alert subject.
Outgoing SMTP server Displays or allows you to set the Simple Mail Transfer Protocol
(SMTP) server that you use on your network.
Username Displays or allows you to set the SMTP server user name.
Password Displays or allows you to set the SMTP server password.
Alert Condition Sends e-mail alerts whenever Lamp Warning , Low Lamp Life ,
Temperature Warning and Fan Lock conditions occur. Select the
settings you want, and then click Submit .
N O T E
The projector sends an alert e-mail (SMART Alert) to your e-mail
address. Click
E-mail Alert Test to confirm that your e-mail
address and SMTP server settings are correct by sending a test
e-mail (SMART Alert-Test Mail).
If the settings are not correct, the e-mail alert messages aren’t sent
or received successfully and no warning or notification message
are available to advise of this state.
Password settings
This menu provides a security function that allows an administrator to manage projector use and
enable the Administrator Password function.
Submenu setting Description
Password When the password function is enabled, the administrator password
is required to access Web Management. Select
Disable to allow
remote web management of the projector without requiring a
password.
N O T E S
l
The first time you enable the password settings, the default password value is four numbers,
for example, 1234.
l
The maximum allowable password length is four numbers or letters.