SMART Board 480i6, Configuration And User'S Manual

Page: 74 / 106

A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
66 smarttech.com/kb/170584
set yellow [target] yellow =[current] no
get yellow yellow =[current] no
set videofreeze [target] videofreeze =[current] no
get videofreeze videofreeze =[current] no
set displayhide displayhide = [target] no
get displayhide displayhide = [target] no
Field definitions
Field Possible values Description
target displaymode
l
= SMART
Presentation
l
= Bright room
l
= Dark room
l
= sRGB
l
= User
The ranges must match the OSD ranges
current displaymode
l
SMART
Presentation
l
Bright room
l
Dark room
l
sRGB
l
User
The ranges must match the OSD ranges
target brightness
l
+ val
l
– val
l
= 0 ~ 100
Spec or – will cause brightness to be
incremented or decremented from it’s current
value. Specifying a numerical value within the
possible range causes brightness to be set
directly to that value.
current brightness
l
= 0 ~ 100 The device’s current brightness.
target contrast
l
+ val
l
– val
l
= 0 ~ 100
Spec or – will cause contrast to be
incremented or decremented from it’s current
value. Specifying a numerical value within the
possible range causes contrast to be set directly
to that value.
current contrast
l
= 0 ~ 100 The device’s current contrast.