Note:
This system is equipped with plug connectors. These enable an easy and secure
connection of the hose lines. Insert the hose into the respective opening of the
connector until you notice a resistance. Only after the resistance, the hose will be
fixed in the anchor.
•
In order to be able to remove the
hose again, you will first have to
remove the safety clamp
•
On the connector you will see a small
white plastic ring. Push it evenly in
the direction of the connector and
simultaneously pull the hose.
3. Insertion of the membranes
•
Remove the hose from the membrane housing.
•
Unscrew the cover from the membrane housing.
(Tool: Key for membrane housing)
•
Then first insert the membrane with the two black rubber rings
into the housing.
•
Insert the membrane into the housing up to the stop.
•
Srew the cover back on to the membrane housing.
•
Insert the hose back into connector.
