IF303 – Operation and Maintenance Instruction Manual
3.24
Figure 3.25 - Step 5 - IF303
Figure 3.26 - Step 6 - IF303
NOTE
This Local adjustment configuration is a suggestion only. The user may choose his preferred configuration via
Configuration Tool, simply configuring the display.
In order to change the address
value, simply take off the
magnetic tool from orifice
Z
as
soon as ADDR is shown on
the display. An arrow pointing
upward (
↑
) increments the
address and an arrow pointing
downward (
↓
) decrements the
address. In order to increment
the address, insert the tool in
S
up to set the value desired.
In order to decrement the
address value, place the
magnetic tool in orifice
Z
to
shift the arrow to the
downward position and
then, by inserting and
keeping the tool in orifice
S
, it is possible to
decrement the address
value.
1
1
In order to decrement
the address value, place
the magnetic tool in
orifice
Z
to shift the
arrow to the downward
position and then, by
inserting and keeping
the tool in orifice
S
, it is
possible to decrement
the address value.