SMAR FI303, Operation, Maintenance & Instruction Manual

Page: 27 / 54

Configuration
3.11
The unit and scale for the output will be the same for the transducer block. Note that the
allowed unit is mA.
Selecting Advanced Settings page, the user can set the fail safe conditions.
Figure 3.8 - FI303 Simatic PDM - Analog Output Block - Advanced Settings - Offline
Configuration
In terms of Online configuration, the user can select at the device menu the Online Configuration for
each Analog Output block:
Figure 3.9 – FI303 Simatic PDM – Online Configuration mode block for AO
For Fail Safe
mode the
options can
be:
Actuator goes
to fail-safe
position,
storing last
valid setpoint
and fail safe
value is used
as a control
regulator input.
The user can
set block
mode
operation.
According to the
block mode, the
user can set the
setpoint.