42
REMOVING/MOUNTING THE SLIDING GUIDES (if any)
If present, there are sliding guides,
left and right
,
that are
therefore not
interchangeable,
on both
sides of the
oven.
Proceed as follows
to remove
the sliding element
from the
lateral guide:
release
the
lateral guide
from the oven
together
with the
sliding element,
as
indicated
in the previous paragraph.
Place the guide on a flat surface.
Now exert some pressure from top down near the
couplings in the sliding element (fig. 1 step 1).
When the couplings
below
come
out of the
rod
of the lateral guide,
the sliding element
has been released and
can be
removed.
(fig. 1 step 2).
fig. 1
To reposition
the sliding guide, position
the upper hooks
on the special rods of
the lateral guide. Always make sure that
the sliding element
is able to slide by
moving in towards
the outside of the
oven.
Now press the sliding element
downwards (fig. 2 step 1) so that it is firmly coupled onto the lower rods (fig2 step
2).
fig. 2
Summary of Contents for FI-36 VTB
