SMA Solar Technology AG
Electrical Connection
Installation Guide
SB16_21TL-IA-IEN112351
31
3. Ensure the cable is correctly in place.
4. Push the bolted connection toward the thread and fasten to a torque of 2 Nm.
☑ The DC connectors are now assembled and can be connected to the inverters, as described in
section 5.4.4 "Connecting the PV Array (DC)" (page 33).
Result
Measure
☑ If the conductors are visible in the hollow
cavity of the clamping clip, the cable is in
the correct position.
• Proceed to step 4.
☑ If the conductors are
not
visible in the
hollow cavity, the cable is not in the correct
position.
• Loosen the clamping clip. For this purpose,
use a screwdriver with a width of 3.5 mm.
• Remove cable and start again from step 1.
Summary of Contents for SUNNY BOY 1600TL
Page 2: ......
Page 6: ...Table of Contents SMA Solar Technology AG 6 SB16_21TL IA IEN112351 Installation Guide...
Page 70: ......
