background image

1  Information on this Document

SMA Solar Technology AG

Installation Manual

5

EDMM-WAGO-IO-IA-en-11

1

Information on this Document

1.1

Validity

This document is valid for:

• EDMM-10 (SMA Data Manager M)

• WAGO-I/O-SYSTEM 750 configured for EDMM-10 (SMA order number: 115214-00.01)

1.2

Target Group

The tasks described in this document must only be performed by qualified persons. Qualified persons must have the
following skills:

• Training in the installation and configuration of IT systems

• Training in how to deal with the dangers and risks associated with installing, repairing and using electrical devices

and installations

• Training in the installation and commissioning of electrical devices and installations

• Knowledge of all applicable laws, standards and directives

• Knowledge of and compliance with this document and all safety information

1.3

Content and Structure of this Document

This document supplements the documents that are enclosed with each product and does not replace any locally
applicable codes or standards. Read and observe all documents supplied with the product.

Illustrations in this document are reduced to the essential information and may deviate from the real product.

1.4

Levels of Warning Messages

The following levels of warning messages may occur when handling the product.

DANGER

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE

Indicates a situation which, if not avoided, can result in property damage.

1.5

Symbols in the Document

Symbol

Explanation

Information that is important for a specific topic or goal, but is not safety-relevant

Indicates a requirement for meeting a specific goal

Desired result

Summary of Contents for Modbus EDMM-10























































Reviews: