5 Mounting
SMA Solar Technology AG
Operating manual
EDML-10-BE-en-13
25
2. Position the product onto the DIN rail from above
and press on the bottom.
1
2
☑ The product snaps audibly into place.
3. Ensure that the product is securely in place.
5.3
Mounting the Product on the Wall
Additionally required mounting material (not included in the scope of delivery):
☐ 4 screws Take note of the diameter of the holes in the wall mounting brackets, the condition of
the wall and the weight of the product.
☐ If necessary: screw anchors and washers (depending on support surface)
Procedure:
1. Attach both wall mounting brackets to the back of
the product using two of the supplied screws each.
Keep in mind that the holes for attachment to the
wall are located on the outside and stick out from
the product to the rear.
2. Align the product horizontally on the wall and use the wall mounting bracket to mark the
position of the drill holes.
3. Drill the marked drill holes.
4. Insert screw anchors into the drill holes if the support surface requires them.
