manualshive.com logo in svg

SMA Solar Technology SUNNY BOY 3.0, Operating Manual, Page: 29 / 100

Share
Download
SMA Solar Technology SUNNY BOY 3.0 Operating Manual Download Page 29

Procedure:

1.

Danger to life due to electric shock

• Disconnect the inverter from all voltage sources (see Section 10, page 60).

2. When using a self-assembly network cable, assemble the RJ45 connector and connect to the

network cable (see connector documentation).

3. Unscrew the protective cap from the network

port.

4. Press the cable support sleeve out of the threaded sleeve.

5. Thread the swivel nut and threaded sleeve over

the network cable. At the same time, thread the
network cable through the opening in the cable
support sleeve.

6. Press the cable support sleeve into the threaded

sleeve.

7. Plug the network cable connector into the

network port on the inverter and screw the
threaded sleeve onto the network port thread on
the inverter.

6 Electrical Connection

SMA Solar Technology AG

Operating Manual

29

SB30-50-1AV-40-BE-en-10

Summary of Contents for SUNNY BOY 3.0





































































































Reviews:

No comments