6 Commissioning
SMA Solar Technology AG
System Manual
SPBusiness-SH-en-10
25
In order to optimally adapt the charging behavior to the different conditions over the course of the
year, the settings can be made separately for two periods (
Season 1
and
Season 2
). For these
periods, separate charging profiles can be defined for each day of the week. Settings for 30-minute
intervals or for the entire day can be made.
Figure 7: LCS Tool - setting Time of Use
Procedure:
1. Select the menu
Setup
.
2. In the
Inverter Parameter
menu in the
Immediate controls
area, make sure that the
parameter
Active Power (P_ref)
is set to
100%
.
3. Enable the
Time of Use
function in the
Power Management
menu. Otherwise, the Peak
Load Shaving function could be used.
4. To define the time windows of both periods, select the period to be defined under
Seasons
and adjust the corresponding settings: To define the entire day with the same setting, select the
field
All Day
of the corresponding day of the week. The same setting is valid for the power
throughout the day. To make settings for the individual periods, select the desired periods of
the corresponding day of the week.
5. Select the period to be used under
Seasons
.
6. Enter the power of the respective time interval. As a result, the battery is discharged (Feed in),
if needed, at values with a positive sign (+), and charged (Charge) at values with a negative
sign (-).
7. Select [
Save
] to save the changes.
6.8
Configuring the Overall System with the
SMA Data Manager
1. Open the user interface of the SMA Data Manager and start the installation assistant.
2. Register the Speedwire devices (all PV inverters). Chose a system password. The system
password is not transmitted to the SMA Energy Meter, the storage system and the Janitza
UMG 604-PRO.
Summary of Contents for STORAGE PACKAGE - BUSINESS
Page 30: ...www SMA Solar com ...