6
Installation & Rear Panel Connections
3. INSTALLATION
Your SM ProAudio SM IN5 was carefully packed in the factory and the packaging was designed
to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine
the packaging and its contents for any signs of physical damage, which may have occurred in
transit.
+ If the unit is damaged, please do not return it to us, but notify your dealer and the shipping
company immediately, otherwise claims for damage or replacement may not be granted.
Shipping claims must be made by the consignee.
3.1 Rack Mounting
The SM ProAudio SM IN5 fits into one standard 19" rack unit of space (1 3/4"). Be sure that there
is enough air space around the unit for cooling. As to avoid overheating, please do not place the
SM IN5 on high temperature devices such as power amplifiers.
3.2 Mains voltage
The SM IN5 has a professional internal power supply thus eliminating the use of external power
adaptors. Before you connect your SM IN5 to the mains, please make sure that your local volt-
age matches the voltage required by the unit!
4. REAR PANEL CONNECTIONS
Please note the following connections and their functions
4.1 GND Ground Pin Connector
The ground pin connector allows for connection of your turntable grounding wire.
Please refer to your turntable manual for information regarding ground connections.
4.2 Ground Lift Switch
In certain situations where you have audible humm or buzz in your system, you can use the
Ground Lift Switch to eliminate this problem. Place the switch in the “Lift” position to lift the
ground.
