9
Front Panel Connections & Control Knobs/Switches
5.3 Phono Input controls
Independent (2 x) rotary volume controls, line/phono switch, and a record/monitor enable switch
This is where you can connect up to two stereo phono/line level devices, control their input gain,
and choose either to monitor the signal directly to your main outputs for monitoring, or to send
the source to the REC outputs and subsequently to your recording device.
Connect your stereo (L&R) phone/line level device with a standard RCA audio cables and turn up
the volume knob to an acceptable level.
A line/phono switch is provided for each stereo pair of inputs which toggles the use of the inputs
as either a fully operational RIAA phono pre-amp or as standard RCA line level inputs.
The REC switch directs the phono/line level source signal to the REC output on the rear panel
when in the drepessed position. When in the non-depressed position the signal is routed directly
to the main outputs on the rear panel.
5.4 Stereo headphone amplifiers (2 x)
Independent (2 x) rotary monitor volume controls, and MIX/REC switch.
This is where you can connect up to two stereo headphones, control their volume, and choose
either to monitor the full mix of your signals from both the front panel inputs and the REC inputs
together, or just the REC input signal from the rear panel.
The MIX/REC switch toggles the monitor mode of the headphone amplifiers.
5.5 Master Volume
The master volume controls the main output level to the Main outputs on the rear panel. (It does
not effect the REC output volume).
The REC IN switch enables a mixed signal of both the input signals on the front panel with the
REC IN input on the rear panel.
5.6 Power switch
Power on/off switch. This is where you enable the unit for use.
