7
Front Panel Controls
4. FRONT PANEL CONTROLS
4.1 Stereo/Aux input selector
The Stereo/Aux input selector on the front panel of the M-Patch is for selecting which physical
input you desire to be assigned to the outputs for immediate listening and control. Select the
“stereo” position to activate the main stereo input source connected to the XLR/combo inputs, or
select “Aux” position to activate the RCA and 3.5mm stereo mini-jack input source.
4.2 On/Off Mute switch
The on/off mute switch on the front panel of the M-Patch is for muting all audio immediately from
the M-Patch.
4.3 Aux Input volume attenuator
The Aux input volume attenuator switch on the front panel of the M-Patch is for adjusting the
level of monitored ouput signal for devices connected to the Aux inputs (either the RCA or 3.5mm
stereo min-jack) of the M-Patch.
4.4 Mono/Stereo summing switch
The mono/stereo summing switch on the front panel of the M-Patch allows you to sum a stereo
signal to a mono signal. This can be very handy when testing your audio for certain issues like
phase cancellation, preparation for AM radio, etc.
4.5 1/2 Output selector switch
The 1/2 ouput switch on the front panel of the M-Patch is for selecting which desired outputs you
would like to send your send your audio to. If you have more than one set of monitors you can
connect one pair to the output 1, and the other to the output 2. Simply change the position of the
switch to toggle between output destinations.
4.6 Stereo Input volume attenuator
The stereo input volume attenuator switch on the front panel of the M-Patch is for adjusting the
level of monitored ouput signal for devices connected to the stereo inputs (XLR combo connec-
tors) of the M-Patch.
