Troubleshooting
If you experience reception problems after
installing your SLx booster, please see below:
No picture or sound
Is the signal reaching your TV? Check:
- Everything, including the booster is plugged
in and switched on
- Coaxial connections are correctly made
(no braid or foil is touching the inner core
Picture or sound breaking up
- Use the best wideband aerial ideally fitted
outdoors
- Use good quality coax cable, poorly
screened cable can pick up noise
- In some cases too much signal can cause
signal break-up to you can solve this by
fitting an attenuator to the booster input
For specific help with digital TV reception
problems, visit
www.digitaluk.co.uk
or
www.bbc.co.uk/reception/television/
freeview/reception
Support: www.slxtechnology.com/support
General Safety Precautions
• To clean first disconnect from your TV and
use a lightly dampened soft cloth. Do not
use chemical solvents or strong detergents.
• Do not attempt to open the unit, there are
no user serviceable parts.
• If anything goes wrong, contact our
technical support or consult a qualified
engineer.
2
Additional Installation Advice
If there is no powered USB port available on
your TV you can use a USB mains adaptor or
connect to a USB port on a PC or other USB
enabled device. You may need to use a USB
extension lead (not supplied) to make the
connection.
Your SLx Booster incorporates a Class 1 filter
to reduce 4G and 5G interference and is
suitable for digital TV signals Ch21-48
(470-694MHz) however if you need to receive
TV on Ch60 in your area you should use one
of our DigiLink SLx Boosters with IR Bypass.
Technical Support
If you experience problems setting up your
aerial, please visit our technical website at
www.slxtechnology.com/support
to send us
a message or
chat live
during office hours.
Booster
In
Out Frequency
Suitable
for
Max
Gain
Typ.
Noise
Power
Requirement
Max
Output
Typ. 4G/5G
Protection
27815V
1
1
88-694MHz
FM/DAB Radio
TV Ch 21-48
Freeview
20dB
<2dB
N/A
100dBµV
>40dB
Specifications
Philex reserve the right to modify their designs or specifications, In the light of future developments, without prior
notice. Performance figures quoted are typical and subject to normal manufacturing and service tolerances.
Standard:
EN 303 354
Product Type:
D Signal Distribution Amplifier
Filter Class:
1 Mitigates 4G/5G interference
Suitable for digital TV signal distribution
Ch21-48 in the UK and EIRE.
Declaration of Conformity
Hereby, Philex declares that this booster/
amplifier for TV broadcast reception in
domestic premises is in compliance with the
Radio Equipment Directive 2014/53/EU.
The full Declaration of Conformity is available
by contacting the following internet address:
www.philex.com/DoC
COMPLIANT
EU Distributor:
Philex Electronic Ireland Ltd.,
Robwyn House, Corrintra,
Castleblayney, Co. Monaghan,
A75 YX76, Ireland
UK Distributor:
Philex Electronic Ltd.,
Kingfisher Wharf,
London Road, Bedford,
MK42 0NX, United Kingdom.
Waste electrical and electronic
products should not be disposed of
with household waste. Please recycle
where facilities exist. Check with your
Local Authority for recycling advice.
Made in China. © Philex Electronic Ltd 2021. vb1.1
