10500 Seymour Ave Franklin Park, IL 60131 | Phone: +1.847.671.4300 / +1.800.982.5839 | Fax: +1.800.447.8329 |
Copyright © 2020 Sloan. All rights reserved.
Page: 5 of 11
Installation Instructions
Code #: 0816884 Draft: 7.0 (10/20)
Setting Up for External Water Supply In and Waste Water Out
Figure 3
Water Supply in
Waste Water Out
(Gravity Fed)
Waste Water Out
(Pump)
1. Connect to water supply in.
a. Make sure that the external water is OFF
b. Using a standard 3/4” yard hose or equivalent, connect to an external water supply.
c. Connect the opposite end of the hose to the Water Supply In on the middle, rear panel of the Rapid
Response Wash Station.
d. Make sure that connection is tight and does not leak.
2. Connect to waste line out (Gravity Fed).
a. Using a standard 3/4” yard hose or equivalent, connect to the Waste Line Out on the bottom, rear
panel of the Rapid Response Wash Station.
b. Make sure that connection is tight and does not leak.
c. Place the opposite end of the hose in an appropriate area for draining waste water tank.
3. Connect to waste line out (Pump).
a. Make sure that the gravity fed ball valve is in the closed position.
b. Using a standard 3/4” yard hose or equivalent, connect to the Waste Line Out on the bottom, rear
panel of the Rapid Response Wash Station.
c. Make sure that connection is tight and does not leak.
d. Place the opposite end of the hose in an appropriate area for draining waste water tank.
