10500 Seymour Ave Franklin Park, IL 60131 | Phone: +1.847.671.4300 / +1.800.982.5839 | Fax: +1.800.447.8329 |
Copyright © 2020 Sloan. All rights reserved.
Page: 8 of 11
Installation Instructions
Code #: 0816885 Draft: 7.0 (10/20)
Draining the Waste Water Tank (Gravity Fed)
Figure 6
DETAIL A
Waste Line Ball Valve
(Open Position)
Waste Line Ball Valve
(Closed Position)
SEE DETAIL A
Note:
Water heater not shown for clarity.
1. Drain the waste tank (Gravity Fed).
a. Make sure that waste line hose is connected to waste line out (Gravity Fed Location, Figure 3. page
5) at the bottom rear panel of the Rapid Response Wash Station.
b. Make sure that the opposite end of the waste line hose is in an appropriate location to drain the waste
water tank. 16 gallons minimum drainage.
c. Open the right side access panel.
d. Locate the waste line ball valve and turn a 1/4 turn to open the valve.
e. Close the waste line ball valve when waste water tank is empty.
f. Close and latch the right access panel.
