Repair Parts and Maintenance Guide
142
The information contained in this document is subject to change without notice.
Faucets and Soap Dispensers
BASYS
®
Infrared Sensor Activated
As the user’s hands enter the beam’s effective range, the beam is reflected
back into the sensor receiver and activates the solenoid valve allowing water
to flow from the faucet. Water will flow until the hands are removed or until
the faucet reaches its automatic time out limit setting.
OPERATION
This feature will operate the faucet
every 12 or 24 hours since last
use, if not used to prevent stagnant
water conditions.
Default purge duration is two
minutes.
Consult factory regarding other
timing options.
IR activation (see above). Cover IR
clic approximately 24 sec. (ignore
LED indications during this period).
Release when requested program
is reached. (See diagram to right).
Programming mode will time out
after 2 minutes if no changes are
made.
12/24 LINE PURGE FEATURE
Activate 12HR
Deactivate
Activate 24HR
1x 24 sec
...1x
...2x
...3x
+
...
Activate 12HR
Deactivate
Activate 24HR
1x 24 sec
...1x
...2x
...3x
+
...
Steps to
Default IR
Function
Activate Function
Setting
Clic
IR Activation
Cover IR clic approximately for 2 sec.
––
––
until LED will flash GREEN 1x - then remove
finger from IR clic (Active for 5 sec.)
Cleaning
IR activation; Cover IR clic 2x - confirmation
2 min.
––
Mode
of the function is active by a couple flashes
by the LED; to return to normal operation cover
IR clic 1x or the faucet will automatically return
to normal function after 2 min.
12/24
Line
See below.
Off
Off
Purge
12HR
Feature
24HR
Sensor
See next page.
6
1-8
Range
Adjustment
Reset
IR activation; Cover IR clic 2x; LED will flash 5x
Manually ––
Electronics
Cover IR clic 1x for 5 sec. until LED
flashes 4x, then remove finger from IR clic
Wait for 20 sec.
(After 10 sec. water will flow for 6 sec.
and automatically adjust to environment)
Security Off
After 90 seconds (max) of hand and/or object
On
––
within sensor appears permanent, waterflow
will stop and will remeasure environment
Please contact factory for more extensive programming options.
