SM-07MN
7
8
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
Diagram 2. SM-07MN system connection.
SM-07MN (Master)
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
SM-07MN (Slave)
Notes:
* Use «Power» plug on the monitor to connect external power 13,5 V. While use external power
supply please keep main power cord ~100-240 V disconnected from the outlet, otherwise it can damage
monitor circuits;
** Door panels, cameras, power supplys, locks and motion sensors described on the schemes are optional
devices and aren’t included into monitors kit;
*** Up to 4 monitors can be connected into one system.
Audio
GND
Data
Video
Audio
GND
Data
Video
Audio
GND
Data
Video
Audio
GND
Data
Video
Audio
GND
Da
ta
Video
SM-07MN (Slave)
SM-07MN (Slave)
4.3. Unit mount
1) Take the surface mount bracket from the kit and place it 150-160 cm from the floor line;
2) Mark and drill four halls in the wall;
3) Take four nuts from the kit and hammer them into the drilled halls;
4) Fix surface mount bracket on the wall by four screws from the kit;
5) Connect all communication wires and fix the monitor on the surface mount bracket.
