2
SM-07MN
23
24
9. Limited warranty
Manufacturer guarantees product normal functioning during the warranty period if the user keeps all
safety instructions described in that manual.
Warranty period is 12 months from the moment of the product purchasing (warranty period could be
extended up to 24 months or more, depending on the local regulations).
Warranty period allows user to make guarantee repair in cases when normal functioning of the product
was violated by the fault of manufacturer and the user has not offend transporting, installation and
working conditions.
This limited warranty does not cover any damage to the product that results from improper installation,
accident, abuse, misuse, natural disaster, insufficient or excessive electrical supply, abnormal mechanical
or environmental conditions, or any unauthorized disassembly, repair or modification.
Warranty void in such cases:
• the product was damaged by the fault of the customer;
• the product wasn’t properly installed according reccomendations from the manual;
• the sticker on the backside of the product was broken;
• the product was not used for its intended function.
This limited warranty covers only repair, replacement, refund or credit for defective products, as provided
above. Manufacturer is not liable for, and does not cover under warranty, any damages or losses of any
kind whatsoever resulting from loss of, damage to, or corruption of, content or data or any costs
associated with determining the source of system problems or removing, servicing or installing products.
This warranty excludes third party software, connected equipment or stored data. Manufacturer is
therefore not liable for any losses or damage attributable to third party software, connected equipment or
stored data.
In the event a product has been discontinued, manufacturer shall either repair the product, offer to
replace it with a comparable product or provide a refund at the lesser of the purchase price or the
product’s current value.
Repaired or replacement products will continue to be covered by this limited warranty for the remainder
of the original warranty term.
8. Hardware motion detection recording
Camera 1 and Camera 2 have motion detection function by external motion sensor signal. When external
sensor connects or disconnects its contacts (depending on
«Sensor type»
setting of CAM 1 or CAM2 in
«Main menu»
→
«Alarm»
, page 17-18),
recording starts
on the monitor. Video recording time is 10
seconds. Press button to stop recording manually.
Use any external sensors that have normaly opened «NO» or normaly closed «NC» contacts. When the
sensor is activated it connects (NO case) or disconnects (NC case) contacts, that triggers recording on the
monitor.
7. Manual and automatic recording
User can take manual snapshots or record video during monitoring outdoor panel or CCTV camera.
Press joystick on the right side of the monitor to start manual recording then press joystick
again to stop recording (if video recording mode is active in
«Main menu»
→
«Mode»
→
«Record
mode»
setting, page 17).
Press joystick on the right side of the monitor to take a snapshot (if snapshot recording mode is
active in
«Main menu»
→
«Mode»
→
«Record mode»
setting, page 17).
Automatic recording occurs every time anybody presses call button on the outdoor panel or some kind of
motion detection is enabled and trigerred.
Note: video can be recorded only if microSD card is installed into the monitor’s slot. In case there is no space on
the microSD card then new records will replace old one.
+12 V
Ground
Ground
Video
Camera
power
supply
Motion sensor
CCTV camera
Not used
Signal
Ground
Video
External motion sensor connection.
