Slinex SM-07MN User Manual Download Page 2

SM-07MN

1

REV. 3.0

2

Attention! 

As a result of continuous upgrades and functionality improvements, technical 
characteristics of the device can be changed without any preliminary declaration.
This manual can contain some inaccuracy or misprint. The owner reserves the right to 
make corrections to the information described in the user manual and device package. 
The last revision of this manual is available on www.slinex.com

Safety instructions

Read and keep that manual.
The device installation process should be carried out by the qulified specialists.
Use the device  from –10 ˚C to +55 ˚C, always keep it within that temperature range.
Installation surface should be free from vibration and impact influence.
Keep this device far from open sources of heat, such as radiators, heaters, and ovens.
The device can be installed near other electronic equipment in case if the temperature of the environment 
does not exceed previously mentioned range.
The device should be protected from the direct influence of the natural phenomena, such as direct 
sunlight, rain or snow.
Don’t use aggressive or abradant detergent for the device surface cleaning.
Use soft wet cloth or tissue to remove strong dirt.
Don’t overpower outlets. It can cause fire or electric shock.

Nature protection

Don’t throw away the device with other  industrial or nutritive trash if you see that 
symbol. Some regions have separation and recycling systems for the electronic 
equipment. Connect with local authorities to receive information about  recycling of 
electronic equipment for your region.

Rights and limitation of liability

All rights reserved. Any part of that document can not be published in any form, translated into other 
languages or reproduced in any way including electronic or mechanical. 
Document recording and copying is strictly denied without owner permission.

Table of contents

1. Package ...................................................................................................................................................................................   3
2. Specification ..........................................................................................................................................................................   3
3. Description.............................................................................................................................................................................   4
4. Installation..............................................................................................................................................................................   5

4.1. Cable requirements.............................................................................................................................................   5
4.2. Schematic diagrams............................................................................................................................................   6
4.3. Unit mount .............................................................................................................................................................   8

5. Operation................................................................................................................................................................................   9

5.1. Incoming call .........................................................................................................................................................   9
5.2. Outdoor panel and camera monitoring ......................................................................................................   10
5.3. Incoming call redirection ..................................................................................................................................   11
5.4. Intercom ..................................................................................................................................................................   12

6. Settings....................................................................................................................................................................................   12

6.1. Main menu..............................................................................................................................................................   13
6.2. System settings.....................................................................................................................................................   13
6.3. Ring settings ..........................................................................................................................................................   15
6.4. Working mode settings......................................................................................................................................   16
6.5. Alarm settings .......................................................................................................................................................   17
6.6. Image parameter settings.................................................................................................................................   20
6.7. Snapshots and records playback....................................................................................................................   21

7. Manual and automatic recording ..................................................................................................................................   23
8. Hardware motion detection recording........................................................................................................................   23
9. Limited Warranty..................................................................................................................................................................   24

!

Summary of Contents for SM-07MN














Reviews: