Page 7
CANOPY HOODS - SLIM LINE
INSTALLATION
SLIM STANDARD & T-SHAPE CANOPIES
1. Mounting to a stud is recommended. However if
mounting to other wall types different fasteners will be
required.
2. Position the canopy mounting bracket (C) in the
required position. Mark and drill the pilot holes. Screw
the bracket to the wall, ensuring that the bracket
is level as this will determine the final level of the
rangehood.
3. Carefully position the rangehood body on the bracket.
4. Position the flue cover mounting brackets (A-B) in the
required position. Mark and drill the pilot holes. Screw
the brackets to the wall.
5. Attach the ducting to the rangehood and duct
according to your requirements (external ducting or
recirculating).
6. Install the flue covers and secure the top flue cover to
the flue bracket with the provided screws.
7. Refit the filters and power the unit.
A
B
C
WARNING:
Do not penetrate any screws into the rangehood as this may result in electrical hazards.
Failure to install the screws or fixing device in accordance with these instructions may result in
electrical hazards.
