Page 6
CANOPY HOODS - SLIM LINE
INSTALLATION
Height of Wall Canopy
The chimney is telescopic and is designed for
hood installations between 650 to 750 mm
above the cooking surface.
Select the desired installation height of the wall
canopy.
Any installation above 750 mm will compromise
the extraction performance.
For optimal efficiency, use smooth-wall, solid
galvanized or plastic ducting for reduced noise
and increased airflow.
Flexible ducting should only be used as a last
resort (ie in difficult installations) and if used,
ensure that it is pulled tight.
The smoother, straighter and shorter the
ducting the quieter and more efficient the wall
canopy will perform.
Preparing the Wall Canopy for
Installation
Please read all the instructions carefully before
installing the wall canopy.
Remove the filters from the canopy to allow
access to wall mounting holes.
To remove the filters, pull the relative catch,
tilting it downwards until it disengages from
the supports. Reverse these instructions when
refitting the filters.
Prior to drilling any holes, check that the area
behind the surface to be drilled is clear of any
electrical cables or pipes etc.
Stainless Steel/Iridium is very easily damaged
during installation if abraded or knocked by
tools.
Whenever possible, protect the top of the cook-
top with cardboard or the like to prevent
damage on installation.
