Slide Kamera HPN-2, User Manual

Page: 6 / 18

6
5. Connections
5.1. By wire
KAIROS controller can be connected to any device equipped with HET-BUS
socket (RJ-45 or LEMO), such as slider drives and remote heads.
Most devices have two HET-BUS ports and multiple devices can be daisy
chained to one controller (order of the devices is not important).
Connecting cables:
• connect KAIROS controller to the first device of your choice, to it’s HET-
BUS IN socket using steering cable;
• further device (if there is any) connect by connecting it’s HET-BUS IN
socket with HET-BUS OUT socket of the previous device;
• connect power supply to devices, that require external power source for
their motors (heads, sliders, etc.), if you’re using RJ-45 connector, plug
the power adapter to all devices; if you’re using HET-BUS with LEMO
connectors, plug the power to the first device;
• KAIROS controller is powered by the HET-BUS connector and requires no
additional power supply, when connected to compatible drive.
Examples of connecting KAIROS controller with other devices:
IN
OUT
X MOTOR
IN
OUT
12V
KAIROS
BULL HEAD
POWER SUPPLY
IN
OUT
X MOTOR
IN
OUT
12V
KAIROS
BULL HEAD
POWER SUPPLY
6. Power supply
KAIROS controller has a built in battery, that enables the controller to work
wireless without any power adaptors.
KAIROS battery is charged by:
• HET-BUS socket - during operation with compatible devices connected to
the socket (please note, that not all devices are able to charge the KAIROS
controller via HET-BUS );
• USB-C socket - you can use any standard phone charger;