12
9. PARALLAX
The
KAIROS
controller is equipped in
auto tracking feature -
PARALLAX
.
It is designed to keep correct angle of
the camera during motion of the slider
and to eliminate the parallax effect.
That enables the camera to hold
the subject in the frame and to keep
correct composition of the image.
PARALLAX
feature has to be
configured and calibrated to work
properly.
To configure
PARALLAX
go to SETTINGS for the Panorama axis by pressing
SET button on the Axis settings panel and choose
Parallax >
.
Choose the drive you want the head
to be linked to. Usually it’s the slider’s
drive. In most cases there’s no other
choice, but you may have other
sliders in your system to choose from.
You can change the assignment later
using the
Set link >
option.
The PARALLAX is enabled, you have
to configure the settings to make it
work properly.
You have to set two parameters:
“target” and “zero”.
You can discard all your settings by
selecting
Reset
option.
Set TARGET
set START point
set END point
•
choose
Set target >
from the Parallax settings menu;
•
set
START point
- set the slider’s
cart at the beginning of your
working range and aim the camera
at the filmed object to set correct
composition of the frame;
•
confirm by pressing ENTER;
•
set
END point
- set the slider and
the head in the opposite position,
aim the camera to set your object
in frame;
•
confirm by pressing ENTER;
•
the controller will return to Parallax
settings menu.
9.1.
Configuring PARALLAX
<PARALLAX LINK ~
›SLIDER
<PARALLAX SETT. ~
›Set target > |
Set zero > |
Set link > }
<PARALLAX SETT. ~
›Reset {
Back |
|
Summary of Contents for HPN-2
Page 18: ......
