4
4. Construction
4.1. Control panel
[1] SLIDER (1st axis)
: use the knob to set the cart’s
direction
and
speed
.
[2] JOYSTICK - THE HEAD (2nd and 3rd axis)
: tilt the joystick left-right and
up-down to rotate the camera horizontally and vertically;
ZOOM (5th axis)
:
rotate the joystick to change the zoom of the lens;
[3] ENTER
button: there’s a button on the top of the joystick, it’s used to change
settings of the controller or navigate in the options menu;
[4] FOCUS (4th axis)
: use the knob to control the focus lens motor;
[5] IRIS (6th axis)
: use the knob to control the iris lens motor;
The position of the
[4] FOCUS
and
[5] IRIS
knobs corresponds directly to the
position of a focus and iris rings on your lens:
[6] SETTINGS button
: enter the settings menu; depending on the current
dialog displayed on the screen, the button enters appropriate settings;
[7] BACK/SHIFT button
- dual-function button: use this button to access
additional memory banks [9] and settings for axes 4-6 (hold it to access
funkctions marked yellow); in menus and options dialogs use this button to go
one step back;
STOP
(center-click)
50% LEFT
50% RIGHT
100% RIGHT
100% LEFT
[12] axis settings
[11] SCREEN
[8] MEMORY
buttons
[1] SLIDER
(1st axis)
[2] JOYSTICK
(2nd, 3rd and 5th axis)
[7] BACK
/
SHIFT
button
[6] SETTINGS
button
[3] ENTER
button
[9] PLAYBACK SPEED
[4] FOCUS
(4th axis)
[5] IRIS
(6th axis)
[10] LED
- charge indicator
In some circumstances (overhang
system, operating from the other
side, etc) you will find, that the drive
moves in the opposite direction.
You can reverse the direction of the
drives in the AXIS SETTINGS menu
and operate as usual.
For details reffer to
“8.1. Axis
custom menu” (p. 10).
TIP
Summary of Contents for HPN-2
Page 18: ......
