Slendertone System Plus, Instruction Manual, Page: 14 / 128

14
Possible Cause
The battery is low
The battery is low
The battery is low
The unit is not properly
connected to the belt
The covers are still on
the pads
The pads are worn
The pads are not
covering the studs
Poor pad contact with
the skin
The pads are worn
Pads are not covering
the metal studs
Too many consecutive
sessions
The pads are worn
The battery is low
Poor pad positioning
Pads are not covering
the studs
Error message
Solution
Recharge the battery
Recharge the battery
Recharge the battery
Ensure the unit and belt
are properly connected
Remove the covers from
the pads
Visit the website or your
local retailer for new pads
Make sure the pads fully
cover the metal studs
Press the pads firmly
against the skin. Smear a
few drops of water on the
surface of the pads. Make
sure the unit is OFF first
Visit the website or your
local retailer for new pads
Reposition the pads so
that the metal studs are
covered
You should just do one
session per day one any
single body area
Visit the website or your
local retailer for new pads
Recharge the battery
See page 6 for correct pad
positioning
Reposition the pads so
that the metal studs are
covered
Switch the unit on and off.
The unit should work
without any problem. If
the error message persists
call the careline for further
details
Problem
The display doesn’t
come on and there is
no signal from the unit
The display is on but
there is no signal
The battery symbol is
flashing
The symbol has
appeared on the
display*
Unpleasant feeling
beneath the pads
The contractions are
very weak even when
the toning intensity is
high
“Err” appears on the
display
* The symbol always appears in conjunction with the left/ right intensity
indicators. If the left indicator appears, there is a problem with the left pad,
the right indicator acknowledges a problem with the right pad and if both
indicators appear there is a problem with the either the middle pad or all
three pads.
quick guide to solving problems