16
BATTERY INFORMATION - CHARGING AND DISCHARGING
CARING FOR YOUR GEL PADS
Your device is powered by a rechargeable battery. The full performance of a
new battery is achieved only after two hours or three complete charge
cycles.
The battery can be charged and discharged hundreds of times, but it will
eventually wear out. To insure optimum battery performance you should use
your device regularly e.g. perform 1 session a day, 3-5 days per week.
If a replacement battery is being used for the first time or if the battery has
not been used for a prolonged period, it may be necessary to connect the
charger and then disconnect and reconnect it to start the charging.
Unplug the charger from the electrical plug and the device when it is not in
use. Do not leave fully a fully charged battery connected to a charger, since
overcharging may shorten its lifetime. If left unused, a fully charged battery
will loose its charge over time.
If the battery is completely discharged, it may take a few minutes before the
purpose. Never use any charger or battery that is damaged.
Leaving the battery in hot or cold places, such as in a closed car in summer
or winter conditions, will reduce the capacity and lifetime of the battery.
Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A
device with a hot or cold battery may not work temporarily, even when the
battery is full charged. Battery perforamance is particularly limited in
tempertaures well below freezing. Do not dispose of batteries in a fire as
they may explode. Batteries may also explode if damaged. Dispose of
batteries according to local regulations. Please recycle when possible. Do
not dispose as household waste.
• The gel pads are for single person use only.
• You should ensure your skin is clean and free of oils, creams and other
lotions before use.
• The durability and effectiveness of the gel pads depends entirely on the
proper use, storage and care on the part of the user, certain skin types
and the type, duration, number of sessions, intensity used and site of
stimulation.
• Ensure your hands are clean before handling gel pads. You should
avoid touching the skin-side of the gel pads with your fingers as much
as possible when applying or removing the belt, as this can transfer oils
and skin particles to the pads’ surface.
• After use, replace the liners on the black side of the gel pads and store
your product in a cool, dry place until the next use.
• Gel pads will need to be replaced periodically as the surface picks up
skin debris and becomes dry over time.
Summary of Contents for System Arms
Page 17: ...17 English ...
