11
T
T
R O U B L E
R O U B L E
-
-
S H O O T I N G
S H O O T I N G
C H E C K L I S T
C H E C K L I S T
If you have problems getting your
SLENDERTONE ABS
5 to work, you should go
through the following checklist:
When did you last change your pads?
Pads need to be changed every 20-30 sessions. Call our
support line below to place an order.
Have you removed all the plastic covers from both the grid and
black sides of the pads?
Remember to keep one set of covers to protect the black side
of the pads during storage.
Are the pads covering the metal studs?
Double-check the pads on your belt to ensure that the grid
side of each pad is fully covering the metal studs.
Are the batteries inserted correctly?
The batteries must be inserted in a specific way for the unit to
work (see page 6). If you find any corrosion within the battery
compartment call the support line below for assistance.
Is your unit inserted into the holder properly?
Remove the unit and wipe the pin with a dry cloth. Then
re-insert the unit, pushing it until it clicks into place.
Are the pads and belt positioned correctly?
Ensure the large, center pad is directly over your navel and
that the smaller pads are directly between your hip-bones
and ribs.
Still having trouble? Call us toll free on
1-800-551-2443
See www.slendertone.com for GelPads & Accessories
English
English
www.slendertone.com
www.slendertone.com
Intensity Keylock Function
If you find a comfortable intensity level,
press the upper and lower halves of the LEFT
intensity button at the same time to lock
that intensity. This will also lock the program
button. This function is only active during
the session in which it was activated.
Deactivate the keylock by performing the
same action again.
Mute Function
If you want to switch off your unit’s sound
effects, press the Information button and
the Program button at the same time. The
mute function remains active indefinitely
unless manually changed. Deactivate the
mute function by performing the same action
again.
P
P
A D
A D
C O N T A C T
C O N T A C T
I N D I C A T O R
I N D I C A T O R
If the Pad Contact symbol ( ) has appeared on the display,
there is a problem with the connection between the pads
and your skin, or between the pads and the belt. The Pad
Contact symbol always appears in conjunction with the left
or right arrow on the display screen as follows: If the left arrow
appears, there is a problem with the left pad. If the right arrow
appears there is a problem with the right pad and if both
arrows appear, there is a problem with either the middle pad
or all three pads.
A
A
D V A N C E D
D V A N C E D
F E A T U R E S
F E A T U R E S
US Flex Pro IM Rev 8 Backup_Layout 1 26/11/2014 12:47 Page 13
