5
5611
12
2021
-
SE20 & SE25 & SE30 & SE40
MC_0051
Technical Specifi cations
EN
Motor:
Custom made reversible DC-motor.
Gear house:
Seawater resistant bronze. Ball-bearing at propeller shaft and a combination of ball bearing and slide bearing at drive shaft.
(Pre-fi lled and sealed for life)
Motor bracket:
Glass fi bre reinforced composite material. Brass thread inserts.
Tunnel:
Cross spun with rowing G.R.P tunnel
Steel & aluminium tunnels available at request.
Propeller:
5-blade skewback “Q-prop” propeller, fi breglass reinforced composite.
Batteries:
Minimum recommended battery capacity (cold crank capacity by DIN/SAE standard)
Contact a battery supplier for more information.
Max. Use:
2 - 3 min. duty cycle at 20°C
Safety features:
- Electronic time-lapse device protects against sudden change of drive direction.
- The electric thermal cut-off switch in electro motor protects against overheating (auto-reset when electro motor cools down).
- Flexible coupling between electro-motor and drive shaft protects electro motor and gear system if propeller jams.
- Original Sleipner panels shut off automatically 6 minutes after last use. This interval can be adjusted in 5 min steps up to 60
minutes or turned off completely.
- Original Sleipner panels use child-safe double ON buttons.
- An integrated microprocessor monitors solenoids, reduce wear and risk of solenoid lock-in.
- Auto-stop of the thruster occurs when an undesirable solenoid lock-in occurs or when continuous operation cut-off timer
exceeds 3 minutes.
MC_0121
Thruster Measurements
EN
Measurement
code
Measurement description
mm inch mm inch mm inch mm inch
ID
Internal tunnel diameter
110
4.33
110
4.33
125
4.92
125
4.92
T (min)
Tunnel thickness min.
4
0.16
4
0.16
4
0.16
4
0.16
T (max)
Tunnel thickness max.
6
0.24
6
0.24
6
0.24
6
0.24
TL
Minimum tunnel length
111
4.37
111
4.37
111
4.37
111
4.37
TL (r
ecommended
)
Recommended tunnel length
133
5.24
133
5.24
136
5.35
136
5.35
WD
Minimum water depth
110
4.33
110
4.33
125
4.92
125
4.92
H
Motor Height
209
8.23
252
9.92
263
10.35
263
10.35
W
Motor width
200
7.87
198
7.80
199
7.83
206
8.11
L
Motor length
183
7.20
183
7.20
183
7.20
183
7.20
*20
*Valid for SE & SEP
*25
*30
*40
MC_0135
Thruster Specifi cations
EN
Description
* 20
* 25
* 30
*40
Available DC System (v)
12v
12v
12v
12v
Thrust 12v or 24v (kg * lbs)
25 kg * 55 lbs
30 kg * 66 lbs
40 kg * 88 lbs
48 kg * 105 lbs
Thrust 10.5v or 21v (kg * lbs)
20 kg * 44 lbs
25 kg * 55 lbs
30 kg * 66 lbs
40 kg * 88 lbs
Typical Boat Size (m * ft)
> 7m * >23ft
> 7m * >23ft
6m - 8m * 20ft - 28ft
8m - 10.5m * 26ft - 34ft
Propulsion System
Single
Single
Single
Single
Power (kw * Hp)
1.5kw * 2hp
1.5kw * 2hp
1.5kw * 2hp
2.2kw * 3hp
Weight (kg * lbs)
9.5kg * 21lbs
9.5kg * 21lbs
9.5kg * 21lbs
10kg * 22lbs
*Valid for SE / SE IP & SEP / SEP IP
MG_0079
TL
WD
H
W
L
ID
T
Tunnel centre line
Propeller position will
vary with each thruster
model
The gear leg/ propeller(s) must
never extend out of the tunnel
Single Propeller
