Slee Cryostat MEV Operating Instructions Manual Download Page 17

Page: 17 / 36

Instructions – MEV

7.5 List of available software settings

Chamber temperature

-35 °C to ambient

The recommended working temperature is -15 °C to -25 °C

Object cooling

(optional)

ON / OFF

If the instrument is equipped with the optional
object cooling system, its function can be activated
or deactivated.

Object temperature

(optional)

-50 °C to 0 °C

If the instrument is equipped with the optional
object cooling system, its function can be activated
or deactivated.

Quick-freeze

(optional)

ON / OFF

If the instrument is equipped with the optional fast
cooling peltier system, its function can be activated
or deactivated.

The default setting for automatic deactivation of the
quick freeze is set to 30 minutes. The timer for
automatic deactivation can be set by an authorized
service technician.

UV disinfection

(optional)

ON /OFF

If the instrument is equipped with the optional UV-
C disinfection system, its function can be activated
or deactivated.

The default setting for automatic deactivation is set
to 30 minutes. The timer can be set by an
authorized service technician.

Light

ON / OFF / AUTO

The light can be set on or off. If AUTO has been
selected, the light will switch off after the time
being set under Light duration.

Light duration

0 - 99 minutes

Summary of Contents for Cryostat MEV





































Search results

Summary of Contents for Cryostat MEV

Reviews:

Related manuals for Cryostat MEV

Brands by name

Popular brands

Slee Cryostat MEV, Operating Instructions Manual

Search results

Summary of Contents for Cryostat MEV

Reviews:

Related manuals for Cryostat MEV

Brands by name

Popular brands