Version：V2.1
6/11
confirm after setting.
Search success interface
Parameter setting interface
Setup complete interface
1) Press the send button to set the parameters of the searched controllers one by one.
During the setting process, pressing any key at this time is invalid until the setting is
completed, the success of the setting will be displayed behind the ID.
2) Press the shutdown button, and the searched controllers will be shut down one by
one. During the setting process, pressing any key at this time is invalid until the setting
is completed, the success or failure of the setting will be displayed behind the ID.
3) Press the power button, and the searched controllers will be set to power on one by
one. During the setting process, pressing any key at this time is invalid until the setting
is completed, the success of the setting will be displayed behind the ID.
②
．
Single setting: In the search interface, move the cursor to the ID of the parameter that
needs to be set, press the "
□
" key to enter the single setting interface, move the cursor to the
corresponding parameter position, and press the "
□
" key, when the option is shaded Time,
press "
↓↑
" key to adjust the value, press "
□
" key to confirm after setting.
Search success interface
Parameter setting interface Setup complete interface
1) Press the send button to set the parameters of the controller with the current ID. When
you hear a long beep from the controller, the LCD screen of the remote control will also
display the sending success, which means that the parameters have been written
successfully.
