Version：V2.1
4/11
3) Communication mode: There are currently three communication modes, infrared
communication, 2.4G scanning and 2.4G broadcasting. The corresponding mode should be
selected according to the communication mode of the controller.
Communication distance: only valid for 2.4G scan mode and 2.4G broadcast mode, super far (48
meters), far (33 meters), normal (24 meters), near (15 meters), super near (3 meters) (Note: The
above distance is tested when there is no obstruction between the controller and the remote control,
and there will be some deviation from the actual use distance)
3.2
．
Check system info
3.2.1 2.4G Scanning
：
In the main interface, move the cursor to "real-time data" and press "
□
" to enter the real-time
data search interface. If the interface prompts, press the search button, and press the search
button to search for the controller ID (if some controllers are currently searched) ID, you can
also search again), after searching the controller ID, select the controller ID that needs to
view the operating information, press the "
□
" key to enter the real-time data interface, and
view the current controller's real-time data and alarm information.
main menu
Search interface
Search success interface
SystmInfo interface
Note:
1) In the real-time data search interface, the ******* option is invalid, so the cursor will not
jump to the ******* option.
2) View real-time data can only be viewed one by one.
3) "Success" is displayed behind the controller ID, which means that the operating
information of the controller has been checked.
4) If the communication is successful, the upper right corner will now **(**)on, the first
number is the number where the ID is located, and the number in brackets is the last two
digits of the ID
