Version：V2.1
5/11
5) The model of the current controller is automatically recognized by the remote control, and
there is no need to select the model on the remote control.
3.2.2. Infrared communication
：
Point the remote control at the controller's infrared emitting tube and receiving tube. On the
main interface, move the cursor to "real-time data" and press the "
□
" key to enter the
real-time data interface to view real-time data and alarm information.
3.2.3. 2.4G broadcast
：
1) When there is only one controller within the communication range of the remote control,
you can use the "View real-time data" function in 2.4G broadcast mode. On the main
interface, move the cursor to "Real-time data" and press the "
□
" key to enter the
real-time data Interface to view real-time data and alarm information.
。
2) When there are two or more controllers within the communication range of the remote
control, the "View real-time data" function of 2.4G broadcast mode cannot be used,
please switch to 2.4G scan mode.
3.3
．
Send Parameters
3.3.1. 2.4G Scanning
：
In the main interface, move the cursor to "Send Parameters" and press "
□
" to enter the
search interface of sending parameters. If the interface prompts, press the search key, and
press the search key to search for the ID of the controller (if some controllers are currently
searched) ID, you can also search again), after searching for the controller ID, select the
controller ID or all sending options that need to set parameters, and press the "
□
" key to
enter the corresponding sending parameter interface.
main menu
Search interface
Search success interface
1
. Send all: In the search interface, move the cursor to "00 Send all", press the "
□
" key to
enter the all-send interface, move the cursor to the corresponding parameter position, and press the
"
□
" key, when the option is shaded , Press "
↓ ↑
" key to adjust the value, press "
□
" key to
