Version：V2.1
9/11
controller ID from small to large.
3) The search interface for real-time data, sending parameters, and reading parameters are
synchronized.
4) The real-time data, sending parameters, and reading parameter interfaces can all be
individually set for startup and shutdown.
5) When setting up the controller, make sure that besides the controller that needs to be
set up, no other controllers are working, to avoid incorrect or under-setup.
6) When some nearby controllers are damaged and cannot communicate, all nearby
controllers can be shut down to find the damaged controller.
4. Related concepts
Battery undervoltage
: When the battery voltage is lower than the set undervoltage protection
voltage, the output will be prohibited
Recovery voltage
: It means that the output is allowed only when the battery voltage needs to be
higher than the set recovery voltage again after undervoltage
Light control voltage
: when the photovoltaic voltage is lower than the set PV voltage for lighting,
the light will automatically turn on; when the photovoltaic voltage is higher than the set lighting PV
voltage, the light will be turned off.
Time control mode
: refers to the entire lighting period can be divided into 5 time periods, the
brightness of each time period (0-9H can be set) can be set according to actual needs to achieve the
purpose of energy saving and power saving.
Induction mode
: When the infrared or microwave probe senses a person, the brightness of the
lamp will become brighter, and the brightness of the lamp will automatically dim after the person walks.
The brightness of the person and the brightness of the person can be adjusted according to actual needs
Adjustment.
Morning mode
: refers to the light on during the time period before dawn.
Power saving mode
: When power saving mode is turned on, the controller will adjust the output
current according to the battery voltage, as shown in the following example
：
11.1V Examples of ternary lithium batteries
：
Assume that the 11.1V ternary battery is set as follows:
Charge voltage: 12.5V
Undervoltage protection: 9V
Recovery voltage: 11.1V
Power saving mode: On (if you choose to turn off, power saving and super power saving are not
started)
Start to save power: 11V (adjustable)
Super power saving: 10V (adjustable)
It is divided into five sections at 10V-11V, and each section is derated by 15%
