Slamtec Athena 2.0, User Manual

Page: 45 / 49

44 / 49
9. Special Note
9.1 Charge point deployment
Precautions for the selection of charging pile location:
(1) The charging pile should be placed on the wall with a space of more than 0.35 meters on both sides
and more than 1 meter in front;
(2) The charging pile shall be close to the wall, and shall not be placed in the mirror wall, back hollowed
out and other areas, etc
；
(3) The position of the charging pile must not be placed on soft ground such as carpet, otherwise it will
cause height difference and cannot be charged;
(4) The position of the charging pile in the scene needs to be marked to prevent incorrect recovery
after moving.
9.2 Restricted usage scenarios
Please avoid using Athena2.0 chassis in the following scenarios to avoid chassis failure or damage.
(1) Overrun/heavy transportation
Do not put in items that exceed the maximum weighing parameter value to avoid affecting the normal
use of Athena2.0. Please refer to the information in the product parameter table for the maximum load-
bearing parameter value.
(2) Sill height
Please ensure that there are no obstacles more than 20mm in front of Athena2.0, and the maximum
height of Athena2.0 over the sill is 20mm. During Athena2.0 driving, please try to avoid passing through
uneven ground or other environments with large height.
(3) Man -made impact
Do not forcefully push or hit the Athena2.0 body when Athena2.0 is in normal use.