Skywalk CHILI2, Manual/Service

Page: 43 / 72

43
You can only fly your skywalk CHILI 2 with a valid flying license and in accordance
with local rules and regulations.
During production, your skywalk CHILI 2 has passed several thorough quality
control checks. More spot checks were performed before shipping
SPeeD SYSteM
The skywalk CHILI 2 can be equipped with a foot-operated Speed System.
The Speed System affects the A-,B- and C1-riser.
Before activation of the Speed System, all the risers have the same length. The CHILI 2
has a very efficient speed system thanks to the 3-Line System.
The A,B and C1-risers shorten during use.
How strongly they shorten is shown on the detailed riser drawing.
The different risers are size-dependant.
Installing the Speed System equipment:
Most commonly used harnesses have pulleys for the speed system already
attached. The speed-system line runs from the front through the pulleys at the harness
to the top. They are tied to the ”Brummel-hooks” at the appropriate length.
With the correct adjustment of the speed system lines, the foot-bar can be reached
easily angled during flight. By straightening the legs, the entire speed range can
be used. Prior to flying, the connection hooks of the foot-operated accelerator and
the acceleration system have to be connected to each other (Brummel-hooks).
Check that the speed system line runs freely.
Shematic drawing of risers on page 63 - 65.