background image

44

All Rights Reserved. 

Sky

Vue

®

HDCP video says no 

HDCP support

Reboot your HDCP video device by turning it off, and unplugging the power cord. Wait up 

to 8 minutes to plug the power back in to see if that works.

HDCP video has

no audio

Make sure you have a 3.5 mm mini-jack cable connected from your HDCP video device 

sound output to the TV’s VGA stereo input. If your HDCP video device uses RCA audio 

jacks, you’ll need to obtain an audio cable with RCA plugs on one end and a 3.5mm plug 

on the other.

Cannot get 1920 x 1080 

from PC VGA

The screen’s max resolution is 1920 x 1080. Your video card may not support this resolu-

tion. Check your video card’s maximum resolution, and use that setting.

Picture is distorted or 

has an abnormal sound

This might be from interference from large electrical appliances, cars, motorcycles or 

fluorescent lights. If the TV is close to the wall, try moving the TV to another location to see 

if the problem still occurs.

Picture does not cover 

the entire screen

If you are using HDMI or a TV digital channel, use the Aspect button to switch to 16:9 

format. If you are using VGA, use the computer’s video controls to adjust the image to the 

screen. Note: If you are watching regular 4:3 TV or 4:3 signals from a VCR or DVD player 

in 480i resolution, use the Aspect button to switch to 16:9 in order to fill up the screen. 

However, this feature will distort the picture.

Picture quality is very 

poor

For best image quality, view HD widescreen programs. If HD content is not available, use a 

digital source (DVD or Blu-ray player, digital satellite or digital cable box). Standard 480i TV 

programs will be noticeably inferior to HD quality.

Some pixels are always 

displaying the same 

color

SkyVue Outdoor TV’s LED screens are manufactured to rigorous standards to maintain 

optimal viewing. However, the LED screen may have minor defects that appear as a small 

bright or dark pixel. This is common to all LED screens used in display and television 

products, and is not specific to SkyVue Outdoor TV’s. For more information, see SkyVue 

Outdoor TV’s’s Pixel Quality Policy in this manual.

Switching a channel 

or source changes the 

volume

Different channels and inputs sometimes have this effect because the channel signal’s 

volume is pre-set.

There is noise or trash 

pixels on the screen

When your TV’s resolution is higher than the digital channel’s broadcast resolution, the 

signal is up-converted to match your TV’s resolution. Upconverting can cause this kind of 

effect.

Tips for high-definition 

users

The TV is an ideal platform for viewing high-definition content. The best image quality can 

be achieved by HDMI, YPbPr (component), then VGA. However, due to variances in broad-

cast practices, it is possible that some image distortion may occur.

Tips for letterbox con-

tent users

Letterbox (widescreen) versions of DVD movies are most commonly formatted for stan-

dard 4:3 TVs. The TV has the capability of expanding this content so the entire screen is 

filled, at the expense of the image proportion. To use this function, press the Aspect button 

on the remote control and cycle among the available options.

The TV turns off auto-

matically

The TV features a power-saving mode which will automatically turn off the TV if there is 

no signal provided for 15 minutes.

 

Summary of Contents for C-OBX-32000-L





















































Reviews: