Battery
icon
Get
ting S
tar
ted
9
8
1.
Remove the SKYTROFA Auto-Injector
from the package.
2.
Connect the USB (large end of the
cable) to the charger (only use the
provided charger). Plug the charger
into a power outlet. Connect the
Micro-USB (small end of the cable)
to the back of the auto-injector. For
protection, charge the auto-injector
with the protective cover on
(see Figure B).
• For more information on charging
b
page 49.
Setting Up
Figure B
3.
Fully charge the auto-injector before
using it for the first time. This will
take
2
hours and
30
minutes. When
the battery icon located at the base
of the auto-injector (see Figure C) is
flashing red or green, it is charging.
When it shows constant green, the
auto-injector is fully charged and is
ready to use after the charging cable
is unplugged.
•
When fully charged, the battery
should last for at least
4
injections.
•
When traveling, bring your charger
and the right adaptor for different
power outlets depending on your
destination.
•
The auto-injector cannot be used
when connected to the charger.
Figure C
