Ultimate 200W×2
CHARGING LITHIUM BATTERY IN THE BALANCE MODE
INC
INC
DEC
DEC
-
-
+
+
Start
Enter
Batt type
Stop
Start
Enter
The left side of the first line shows the type of battery you
choose. The value on the left of the second line of the
charger is current user set. After setting the current and
voltage, press
Start/Enter
key for more than 3 seconds to
start the process.(charge current: 0.1-10.0A, voltage: 3.7-
22.2V).
This function is for balancing the voltage of Lithium-polymer battery cells while charging.
In the balance mode, the battery needs to have a balance lead to connect to the
individual balance port of the charger. And you need to connect the battery's power lead
to the output of charger. Charging in this mode is different from the normal modes,
because the built-in processor monitors voltage of individual cell and control input current
fed into each cell to equalized voltage of individual cell.
Charging lithium battery in the balance mode
Number
of
cells
Battery
voltage
Charging
time
Charged
capacity
This screen shows the real-time status during charge
process. Press
Batt Type/Stop
key once to stop the charge
process.
This displays the number of cells you set up and the
processor detects. R shows the number of cells detected by
the charger and S is the number of cells set by you at the
previous screen. If both numbers are identical you can start
charging by press
Start/Enter
button. If not, press
Batt
Type/Stop
button to go back to previous screen to carefully
check the number of cells of the battery pack before going
ahead.
Charging
current
'> 3 seconds '
·
17
