Table of Contents
WARNING:
Welcome:
To enjoy your RC activities, you really need a good helper to
charge your batteries well, while SKYRC endeavors to be the one
you can rely on. Hard work pays off: SkyRC iMAX B6 Evo
charger is finally available.
With brand new but simple intelligent firmware in the same
classic design, we hope that this charger will be the right one to
help you have better performance in the RC field.
Features:
The charger supports multi-chemistry batteries, such as LiPo,
LiFe, LiHV, LiIon, NiMH, NiCd and Pb (Including Pb AGM
battery).
The charger's interface is simple: only ten program and system
settings; users can look through the menu quickly within seconds.
Eight of the ten programs are preset for practical applications.
Besides, it can perform as a power supply for other DC
equipment. RC gurus can calibrate their battery voltage as per
their experience or multimeter, maximize their battery
performance.
Pleasure be sure to read the INSTRUCTIONS, WARNINGS and
SAFETY PRECAUTIONS before the first use. Always bear in
mind not to mishandle the batteries or battery chargers to avoid
explosion or fire.
Mishandling batteries and battery
chargers are extremely dangerous,
which may cause fire and explosion.
Introduction
01 ·
B6 Evo
Never leave the charger unattended
when charging the battery.
LiPo batteries pose a severe risk of
fire if not properly handled.
Introduction
Buttons
Specifications
Warning and Safety Precautions
Program Flow Chart
Power and Battery Connection
Glossary
Program Descriptions
Program 1-8
Quick Start Guide
Lithium Battery Program
(LiPo/LiFe/Lilon/LiHV)
NiMH/NiCd Battery Program
Pb Lead-acid Battery Program
DC / DC Converter
Controlling the Charger Using the App
User Calibration
Battery Voltage Meter
System Setting
Warning and Error Message
FAQ
The Set Contains
Conformity Declaration
Regulatory Information
Commonly Used Terms
Warranty and Service
01
03
03
04
06
08
10
11
12
13
13
15
17
18
20
22
23
24
25
26
27
28
29
30
31
